Температура процессора сидит в файле:
$ cat /proc/acpi/thermal_zone/THRM/temperature
temperature: 49 C
ещё можно инсталлировать дополнительный компонент:
sudo apt-get install lm-sensors
затем выполняем вот такую команду и на все вопросы отвечаем yes:
$ sudo sensors-detect
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you’re doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters…
Use driver `i2c-nforce2′ for device 0000:00:01.1: nVidia Corporation nForce2 SMB us (MCP)
We will now try to load each adapter module in turn.
Module `i2c-nforce2′ already loaded.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev’ to be loaded.
Do you want to load `i2c-dev’ now? (YES/no): y
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus nForce2 adapter at 5000 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x1b
Probing for `Maxim MAX6650/MAX6651’… No
Client found at address 0x2f
Probing for `National Semiconductor LM78’… No
Probing for `National Semiconductor LM78-J’… No
Probing for `National Semiconductor LM79’… No
Probing for `National Semiconductor LM80’… No
Probing for `Analog Devices ADT7470’… No
Probing for `Winbond W83781D’… No
Probing for `Winbond W83782D’… No
Probing for `Winbond W83792D’… No
Probing for `Winbond W83793R/G’… No
Probing for `Winbond W83791SD’… No
Probing for `Winbond W83627HF’… No
Probing for `Winbond W83627EHF’… No
Probing for `Winbond W83627DHG’… No
Probing for `Asus AS99127F (rev.1)’… No
Probing for `Asus AS99127F (rev.2)’… No
Probing for `Asus ASB100 Bach’… No
Probing for `Winbond W83L786NR/NG/R/G’… No
Probing for `Analog Devices ADM9240’… No
Probing for `Dallas Semiconductor DS1780’… No
Probing for `National Semiconductor LM81’… No
Probing for `Analog Devices ADM1029’… No
Probing for `ITE IT8712F’… No
Probing for `Fintek custom power control IC’… No
Probing for `Winbond W83791D’… No
Client found at address 0x50
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM’… No
Client found at address 0x51
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM’… No
Client found at address 0x52
Probing for `Analog Devices ADM1033’… No
Probing for `Analog Devices ADM1034’… No
Probing for `SPD EEPROM’… Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM’… No
Next adapter: SMBus nForce2 adapter at 5040 (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78′ at 0x290… No
Probing for `National Semiconductor LM78-J’ at 0x290… No
Probing for `National Semiconductor LM79′ at 0x290… No
Probing for `Winbond W83781D’ at 0x290… No
Probing for `Winbond W83782D’ at 0x290… No
Probing for `IPMI BMC KCS’ at 0xca0… No
Probing for `IPMI BMC SMIC’ at 0xca8… No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor’… No
Trying family `SMSC’… No
Trying family `VIA/Winbond/Fintek’… No
Trying family `ITE’… No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor’… No
Trying family `SMSC’… No
Trying family `VIA/Winbond/Fintek’… Yes
Found `Winbond W83627HF/F/HG/G Super IO Sensors’ Success!
(address 0x290, driver `w83627hf’)
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): y
Silicon Integrated Systems SIS5595… No
VIA VT82C686 Integrated Sensors… No
VIA VT8231 Integrated Sensors… No
AMD K8 thermal sensors… No
AMD K10 thermal sensors… No
Intel Core family thermal sensor… No
Intel AMB FB-DIMM thermal sensor… No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627hf’ (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627HF/F/HG/G Super IO Sensors’ (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To load everything that is needed, add this to /etc/modules:
#—-cut here—-
# Chip drivers
w83627hf
#—-cut here—-
Do you want to add these lines automatically? (yes/NO)y
смотрим что получилось в /etc/modules
$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with «#» are ignored.
lp
# Generated by sensors-detect on Thu Aug 12 23:21:01 2010
# Chip drivers
w83627hf
потом ребутимся
$ sudo reboot
после чего выполняем команду
$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +48.5°C (crit = +100.1°C)
видимо, это не всегда работает, по идее эта команда должна показывать и частоту вращения кулера.
$ sensors
gl520sm-i2c-0-2d
Adapter: SMBus Via Pro adapter at 5000
+5V: +5.13 V (min = +0.00 V, max = +0.00 V)
+3.3V: +3.31 V (min = +0.00 V, max = +0.00 V)
+12V: +12.03 V (min = +0.00 V, max = +0.00 V)
Vcore: +2.11 V (min = +0.00 V, max = +0.00 V)
fan1: 0 RPM (min = 0 RPM, div = 1)
fan2: 0 RPM (min = 0 RPM, div = 1)
temp1: +35.0 C (high = -130.0 C, hyst = -130.0 C)
temp2: +35.0 C (high = -130.0 C, hyst = -130.0 C)
cpu0_vid: +2.050 V
beep_enable:disabled
